TP-LINK CPE210 Review 2019

TP-LINK CPE210 Review – Buyer’s Guide

 

Our Review & Buyer’s Guide of TP-LINK CPE210 will give you an in-depth idea of all things involved in it.

Moreover, with our picked advantage and drawback, you could easily take a decision whether TP-LINK CPE210 is the right choice to accompany you in near future or not. So, let’s get started…Here’s TP-LINK CPE210!

In A Hurry? Top Reasons To Buy

It gets off the path by offering more than just a repeater. It’s wide coverage, robust design, and multiple features allow it to satisfy the most demanding.

If You’re Interested In Reading Customer Reviews Of TP-LINK CPE210
You Should Check From Amazon Now

 

 

 

Main Advantage

The Wifi repeater – TP-Link CPE210 is particularly optimized for long-distance Wi-Fi connections. Its high sensitivity, high power, and high gain antenna have allowed it to extend its range to more than 5km. It operates in the 2.4GHz band and follows IEEE 802.1b, g and n standards with a bit rate of 300Mb/s.

Main Drawback

Because of its power over Ethernet (Power over Ethernet) cable, which is very convenient in some cases, it requires you to use it even if you only plan to use it entirely wirelessly.

 

TP-LINK CPE210

MAIN CHARACTERISTICS EXPLAINED

 

Very Long Range

The large coverage of this repeater comes from the fact that it has both a high reception sensitivity, up to -95dBm, and a relatively high transmission power. The latter is adjustable according to the specific needs of each and can deliver up to 500 mW (27dBm).

It is equipped with a directional polarized antenna with a high gain of 9dBi and using MIMO 2 × 2 technology (multiple inputs, multiple outputs). A metal ground plane increases its directivity and gain.

Its range can reach and even exceed 5km in direct view. The quality of the transmission is not sacrificed because the MAXtream TDMA TP-LINK technology implemented keeps it at its maximum level even with an increase in the number of users connected, which is often the case in the Point to Multipoint configuration (PTMP).

 

Designed For Outdoor

The CPE210 has been specifically designed for outdoor use. The design of its case has been specially designed to make it completely watertight even to splash water, which earned it the IPX5 certification. It can be easily installed on a mast and its mounting system is provided.

It is highly weather resistant and can be used in extreme weather conditions, whether in the sun, rain, snow or wind. Its operating temperature range is from -30 ° C to 70 ° C.

To perfect this outdoor use, it is also equipped with protection against lightning (6kV) and electrostatic discharges (15kV). A grounding terminal is provided and must be connected to a good earth ground to ensure optimum safety.

 

Many Modes Of Operation

This repeater can be used in a Wi-Fi point-to-point or point-to-multipoint configuration. It integrates a very user-friendly web interface for its configuration and administration.

Several modes of operation are possible: “Access point” mode allowing access to Wi-Fi equipment, “Client” mode where it acts as a Wi-Fi adapter for wired equipment, “Repeater” mode to extend the scope of a Wi-Fi network, “Router access point” mode to route the traffic, with possible translation of public address into private addresses (NAT) and serves as access point, finally the mode “Router client point access “for the provision of wireless Internet services. (WISP)

Two RJ-45 Ethernet ports are available for connection to other network devices and are used for PoE power at the same time.

Check Current Price on Amazon

Leave a Reply

Your email address will not be published. Required fields are marked *